$class: 'RunSelectorParameter'

The following plugin provides functionality available through Pipeline-compatible steps. Read more about how to integrate steps into your Pipeline in the Steps section of the Pipeline Syntax page.

For a list of other such plugins, see the Pipeline Steps Reference page.

$class: 'RunSelectorParameter'

$class: 'RunSelectorParameter'

Defines a parameter that specifies how a Copy Artifact build step should select which build to copy from. Note that this parameter type is easier to use when starting the build from a browser; to specify a value via direct HTTP POST or the CLI, valid XML must be given.

Be aware that this string value is encoded selector configuration, and not compatible with different plugin versions.

name : String
defaultSelector
- buildNumber
  - buildNumber : String
    While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}").
- fallback
  - entryList
    - runSelector
      Nested Choice of Objects
      buildNumber
      
      buildNumber : String
      While this selector is for build numbers (e.g. "22" for build #22), you can also resolve build parameters or environment variables (e.g. "${PARAM}").
      
      fallback
      
      parameterized
      
      parameterName : String
      Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.
      You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.
      
      permalink
      
      id : String
      
      status
      
      buildStatus
      Values: STABLE, SUCCESSFUL, UNSTABLE, FAILED, COMPLETED, ANY
      
      triggering
      
      allowUpstreamDependencies : boolean (optional)
      Tracks upstream builds not only with build-triggering relations, but also with relations via artifacts.
      
      upstreamFilterStrategy (optional)
      Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
      
      Values: UseGlobalSetting, UseOldest, UseNewest
    - runFilter
      Nested Choice of Objects
      and
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      runFilter
      Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      or
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      runFilter
      Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      runFilter
      Nested Choice of Objects
      and
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      or
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      runFilter
      Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      runFilter
      Nested Choice of Objects
      and
      
      runFilterList
      Array / List of Nested Choice of Objects
      and
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      displayName
      
      runDisplayName : String
      Filter the run based on its display name. It accepts the first run that has the display name matching the given parameter. The iteration is done from newest to oldest run.
      
      $class: 'DownstreamRunFilter'
      
      upstreamProjectName : String
      
      Copy artifacts from a build that is a downstream of a build of the specified project. You can use variable expressions.
      
      Downstream builds are found using fingerprints of files. That is, a build that is triggerd from a build isn't always considered downstream, but you need to fingerprint files used in builds to let Jenkins track them.
      
      Note: "Downsteram build of" is applicable only to AbstractProject based projects (both upstream and downstream projects).
      
      AbstractProject based projects:
      
      Freestyle projects
      
      Multi-configuration projects
      
      Maven projects
      
      Non AbstractProject based projects:
      
      Pipeline jobs (aka. Workflow jobs)
      
      upstreamBuildNumber : String
      The number of the build to find its downstream build. You can also specify display names. You can use variable expressions.
      
      not
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      or
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
      
      parameterized
      
      parameter : String
      Specify the value passed via the parameter "Build filter for Copy Artifact". E.g. You specified "Build filter for Copy Artifact" as PARAM, specify ${PARAM} here.
      
      parameters
      
      paramsToMatch : String
      
      Jobs may be filtered to select only builds matching particular parameters or other build variables. Use PARAM=VALUE,... to list the parameter filter; this is the same syntax as described for multiconfiguration jobs in Project name except with parameters instead of axis values. For example, FOO=bar,BAZ=true examines only builds that ran with parameter FOO set to bar and the checkbox for BAZ was checked.
      
      saved
- parameterized
  - parameterName : String
    Name of the "build selector" parameter. A parameter with this name should be added in the build parameters section above. There is a special parameter type for choosing the build selector.
    You can pass not only the parameter name, but also the parameter value itself. This is useful especially used with workflow-plugin.
- permalink
  - id : String
- status
  - buildStatus
    - Values: STABLE, SUCCESSFUL, UNSTABLE, FAILED, COMPLETED, ANY
- triggering
  - allowUpstreamDependencies : boolean (optional)
    Tracks upstream builds not only with build-triggering relations, but also with relations via artifacts.
  - upstreamFilterStrategy (optional)
    Jenkins launches only one build when multiple upstreams triggered the same project at the same time. This field specifies from which upstream build to copy artifacts in those cases. "Use the oldest" copies artifacts from the upstream build with the smallest build number (that is, oldest). "Use the newest" copies artifacts from the upstream build with the largest build number (that is, newest). The default value is "Use global setting", which behaves as configured in "Manage Jenkins" > "Configure System".
    - Values: UseGlobalSetting, UseOldest, UseNewest
description : String (optional)

Was this page helpful?

Please submit your feedback about this page through this quick form.

Alternatively, if you don't wish to complete the quick form, you can simply indicate if you found this page helpful?

See existing feedback here.

User Handbook

Tutorials

Resources

$class: 'RunSelectorParameter'